Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.     

石英砂粒径对水合物沉积物力学性质的影响

利用自主研发的水合物沉积物原位合成与力学性质测试的高压低温三轴仪,通过多级加荷的试验方法,以不同粒径的砂粒作为沉积物骨架进行三轴压缩试验,得到了剪切过程的应力-应变关系曲线,以及不同粒径尺寸沉积物的强度,还有剪切过程中的体积变化关系。结果表明:含水合物沉积物强度随着沉积物粒径尺寸的增大而增强;在降压剪切过程中,所有粒径的水合物沉积物式样均有明显的剪缩现象。     

A Golgi Apparatus-Targetable Probe Based on Lanthanide Complexes for Ratiometric Time-Gated Luminescence Detection of Hydrogen Sulfide

Development of bioanalytical methods for selective and accurate detection of H₂S in living samples is essential for understanding the pathological and physiological functions of this gasotransmitter in biological systems. Here we report a Golgi apparatus-targetable lanthanide complex-based luminescent probe, Golgi-ABTTA-Eu³⁺/Tb³⁺, that can be used for accurately determining H₂S in aqueous solution and living cells via the ratiometric time-gated luminescence (RM-TGL) technique. This probe is composed of 2,2′:6′,2′′-terpyridine-Eu³⁺/Tb³⁺ mixed complexes as the luminophore, 4-azidobenzyl-ether as the responsive moiety, and sulfanilamide as the Golgi apparatus-targeting moiety. Upon reaction with H₂S, accompanied by the cleavage of 4-azidobenzyl group from the probe molecule, the long-lived emission of Tb³⁺ complex at 540 nm is significantly enhanced, while that of Eu³⁺ complex at 610 nm is obviously reduced. It was noted that the I₅₄₀/I₆₁₀ ratio increased by 8.8 times after the probe was exposed to H₂S, which enabled H₂S to be detected with RM-TGL method. After being incubated with living cells, the probe molecules were selectively accumulated in the Golgi apparatus, which allowed H₂S in the Golgi apparatus to be successfully imaged in RM-TGL mode.     

Mechanical behaviour of the upper layers of a sandy loam soil under shear loading

The mechanical behaviour of the upper layers of a sandy loam soil was studied under standard triaxial compression and direct shear box tests. Variations of soil material properties were investigated at four different initial dry bulk densities of 1410, 1520, 1610 and 1670 kg/m³. Soil deformation and volume change under the triaxial compression loading were also studied at these bulk densities. Results from the two tests showed increases in the soil mechanical properties with the initial dry bulk density. The internal friction angle values measured with the triaxial compression apparatus exceeded those measured with the direct shear box. In contrast, the soil cohesion values measured with the direct shear box exceeded those measured with the triaxial compression apparatus. Under the triaxial compression test, the loose soil samples underwent contraction and volume reduction, whereas the dense samples swelled and failure cracks appeared clearly at various planes. The soil contraction for the former case characterizes the occurrence of soil compaction, whereas the cracks propagation and volume increase in the latter case characterizes the breaking up and loosening of soil during tillage operations. For the loose and moderately compacted states, the engineering Poisson's ratio increased with the axial strain until loading was completed. It also increased at the compacted and very compacted states until reaching given loading stages, after which its value started to decrease. This shifting in the engineering Poisson's ratio during loading may provide another identification of the moment of soil failure occurrence, in addition to that of the maximum shear stress.     

含能材料三轴动态压缩实验的一个计算机模拟方法

在含能材料单轴、受限三轴动态压缩实验的基础上，提出一种将计算机数值模拟和实验数据相结合，估算实验系统中钢筒与试件间的库伦摩擦力，从而正确确定含能材料的动态三轴力学性能（弹性模量Ｅ，泊桑比ν，屈服限Ｙ等）的方法。本方法用于ＴＮＴ炸药受限三轴动态压缩实验，通过建立钢筒－试件的库伦摩擦有限元模型，采用ＡＤＩＮＡ通用程序进行动力分析，估算了摩擦力对实验数据的影响，获得了考虑摩擦力修正后的ＴＮＴ三轴动态压缩响应，为含能材料三轴动态力学性能的确定提供了一种有效的方法。     

表面力仪的改进及超薄膜流变特性的实验研究

在对原表面力仪进行较大改进的基础上 ,以 5 0 0 SN基础油和十六烷为研究对象 ,进行了超薄膜流变特性的实验研究 .结果表明 :在超薄膜润滑条件下 ,5 0 0 SN和十六烷均表现出明显的非牛顿剪切响应 ,即剪切稀释现象 ;摩擦力幅值随剪切速度的增大急剧上升到最大值 ,然后下降至某一固定值附近并产生波动 ;剪切挤压下的临界膜厚小于静态挤压的临界膜厚 ,剪切运动对吸附层有序结构产生破坏作用     

新型皮肤摩擦特性测量装置的实验研究

研制出新型皮肤摩擦特性测量装置并用于测量人及动物体内、外皮肤的摩擦特性,在不同试验参数下测定了皮肤与假肢接受腔材料之间的摩擦系数.结果表明:该装置法向加载精度高达99.59%;在相同试验条件下测得猪体外皮肤摩擦系数的重复性较好;在人体上、下肢不同部位,只有手掌部位皮肤与其它部位的摩擦系数有显著性差异(P＜0.005);在控制法向载荷和往复移动频率2种模式下得到兔体内皮肤摩擦系数的试验结果具有可比性,摩擦系数随着法向载荷的增加而降低,随着往复移动频率的增加而增大;用该装置摩擦前后其皮肤组织结构有明显变化.     

Gyromat 2000陀螺经纬仪强制对中装置的研制

Gyromat2000陀螺经纬仪是目前自动化程度和精度最高的电子陀螺经纬仪，为了保证其在强制对中方位边上高精度的测量，必须对仪器的强制对中装置进行研制，该文结合作者实践过程，对该装置的研制和测试工作进行阐述。     

动态加载装置和动态测试技术

本文介绍了力学试验中各种类型冲击加载装置及有关的动态测试技术,讨论了分段式Hopkinson压杆装置的加载特性、主要优点、用途以及在该装置上采用的一些测量新技术。文章中提出的应力波调节器,结构简单,重复性好,是动态光测技术中一种崭新的冲击加载装置。     

TNT炸药动静态变温三轴压缩力学性能的试验研究

介绍了一种高能材料动静态变温三轴压缩试验装置，在熔点以下温度，通过对国产单质炸药ＴＮＴ在中等应变速率（２－４／ｓ）及准静态（３×１０－３／ｓ）条件下三轴压缩力学性能的测试，得出ＴＮＴ的杨氏模量Ｅ、泊松比ν和屈服极限Ｙ，以及当加载速率和温度改变时这些参数的变化规律。并提出三轴应力状态下屈服极限的一种确定方法。该三轴压缩试验装置以及三轴压缩应力状态下力学参数的测试、分析、处理系统为研究高能材料力学性能提供了一套完整的技术和手段。